PDA

View Full Version : Maho Mh 1000c C/w Phillips 432-20



SIMONB
08-24-2007, 01:48 PM
Hi,
Our sister company in Cambridge, Ontario, Canada has recently purchased the MH100C.
I have no information on this machine at all, and have never seen one before!
I was wandering if anyone is near to that area and maybe could help with training or something?? Obviuosly for pay!!
Or, any info on the control would be great, I know it's alot ot ask but thought I'd give it a shot,
Thanks.
Simon

fiki
08-28-2007, 09:18 AM
as to my knowledge, phillips is pretty simple and basic..if you have experience or know someone that has experience with fanuc control there shouldnt be any problems figuring out phillips...

SIMONB
09-11-2007, 09:53 AM
Thank you,
I have just received some literature on the machine and the cnc control, it does look starightforward.
Thanks anyways!

Rip²eR
09-15-2007, 03:01 PM
i work with the 432 daily, if you need something just ask

Grtz

SIMONB
09-19-2007, 09:01 AM
i work with the 432 daily, if you need something just ask

Grtz

Hi , thank you!!
I was actually at our sister plant yesterday for the day trying to geth this machine going for them, with limited success!
We figured out how to set offsets etc and actually centre drilled a part. but we could not drill the part with the next tool, it seemed like it was ignoring it's tool length offset??
The second toll would always be around 5.5" above the part, (which is the same offset value as the first tool, the centre drill.
I have pasted the program below, if you have any ideas, please contact me, you can email me at my work address:

sbarraball@bangormetals.com

Many thanks!!

%PM
N001
N002 G18
N003 G90
N004 G00
N005 G40
N006 G52
N007 T1 M6
N008 G81 Y0.2 Z-0.2 S1000 M3 F2.0
N009 G79 X0.61 Z-0.61 Z0
N010 G79 X6.28 Z-0.61
N011 G79 X6.28 Z-4.39
N012 G79 X0.61 Z-4.39
N013 G00 Y10.0
N014 T2 M6
N015 G81 Y0.2 Z-0.65 S325 M3 F3.0
N016 G79 X0.61 Z-0.61 Z0
N017 G79 X6.28 Z-0.61
N018 G79 X6.28 Z-4.39
N019 G79 X0.61 Z-4.39
N020 G00 Y10.0
N021 M30

hpowell
09-28-2007, 10:23 AM
Can anyone help me set up the control and filr transfer software?
Things such as baudrate, parity, handshaking, etc. Also parameter settings on the control.
Thanks,
Harry

solid sender
10-11-2007, 05:08 PM
Hi , thank you!!
I was actually at our sister plant yesterday for the day trying to geth this machine going for them, with limited success!
We figured out how to set offsets etc and actually centre drilled a part. but we could not drill the part with the next tool, it seemed like it was ignoring it's tool length offset??
The second toll would always be around 5.5" above the part, (which is the same offset value as the first tool, the centre drill.
I have pasted the program below, if you have any ideas, please contact me, you can email me at my work address:

sbarraball@bangormetals.com

Many thanks!!

%PM
N001
N002 G18
N003 G90
N004 G00
N005 G40
N006 G52
N007 T1 M6
N008 G81 Y0.2 Z-0.2 S1000 M3 F2.0
N009 G79 X0.61 Z-0.61 Z0
N010 G79 X6.28 Z-0.61
N011 G79 X6.28 Z-4.39
N012 G79 X0.61 Z-4.39
N013 G00 Y10.0
N014 T2 M6
N015 G81 Y0.2 Z-0.65 S325 M3 F3.0
N016 G79 X0.61 Z-0.61 Z0
N017 G79 X6.28 Z-0.61
N018 G79 X6.28 Z-4.39
N019 G79 X0.61 Z-4.39
N020 G00 Y10.0
N021 M30
I see this is an old query. Do you still need help?

kotten1
07-06-2008, 05:13 AM
i work with the 432 daily, if you need something just ask

Grtz

It’s good to now.
At my factory we also have an old machine whit Philips cnc 432.
We have just got it so machine is not running jet.

So maybe I become to need some help from you.

Kotten1
/Sweden