PDA

View Full Version : stable CNC router(3D engraver)



laserengraver
06-05-2007, 05:38 AM
After saw those nice picture for the CNC router, Also want to show ours.
These are only standard feature, also can produce according buyer's requirement.
Hope you like them.:rainfro:
Jenny

Foxoby
10-03-2009, 03:15 PM
Hi Jenny,

just to confirm that the build quality of the weike machines is excellent. I purchased a wk 1313 from you a couple of months ago and it is a lovely machine for its size.

I do have one major query though ! I have two seats .....ArtCam Pro and also Alpha Cam 2003 version. Please let me know which ArtCam Postprocessor you recommend for 2D and 3D work.......also for 4 Axis work as I purchased a Rotary 4th Axis. I also need a Post Processor for AlphaCam which one of there posts most closely resembles the Weike machine ???? There were no G,M,F,S etc code requirements supplied with the machine.

I have spoken to Cici at your factory a number of times but still have not really got an answer too these questions. This is an important issue to resolve if you are wanting to sell your machines in the uk / europe.

Look forward to your reply.

Best Wishes

Andy

laserengraver
01-21-2010, 07:57 PM
Hi Jenny,

just to confirm that the build quality of the weike machines is excellent. I purchased a wk 1313 from you a couple of months ago and it is a lovely machine for its size.

I do have one major query though ! I have two seats .....ArtCam Pro and also Alpha Cam 2003 version. Please let me know which ArtCam Postprocessor you recommend for 2D and 3D work.......also for 4 Axis work as I purchased a Rotary 4th Axis. I also need a Post Processor for AlphaCam which one of there posts most closely resembles the Weike machine ???? There were no G,M,F,S etc code requirements supplied with the machine.

I have spoken to Cici at your factory a number of times but still have not really got an answer too these questions. This is an important issue to resolve if you are wanting to sell your machines in the uk / europe.

Look forward to your reply.

Best Wishes

Andy

Hi Andy, sorry did not longon for long time. Does the problem solved?