PDA

View Full Version : Problem Uneven cuts, 1/4" off



Lisa_jenson1982
10-21-2018, 12:55 AM
I have a shop sabre IS series. I have noticed that I don't have the sharp edges on fiberboard that we used to have. One chair will be fine, but the one next to it will be off.

I did notice the router spindle was loose, so we tightened it up. But we have to keep tightening it up every other day. I have not checked other bolts, but I will monday morning.

Also, noticed the boards are always off on the X axis at least 1/8 off to sometimes a half inches off. Had Ben get in the computer and he seemed to fix it for that one day, but it's doing it again!

ger21
10-21-2018, 07:45 AM
1) Use blue Loctite.

2) What did he do to fix it?

Lisa_jenson1982
10-21-2018, 07:56 PM
1) Use blue Loctite.

2) What did he do to fix it?

I will tell Maintance man to put some loctite on it.

I honestly don't know what Ben did, he got in the team viewer and changed a dimension setting for the x axis I believe. I will pay attention next time I call him this week.

Lisa_jenson1982
11-07-2018, 08:57 PM
I ended up calling Shop Sabre and Ben got into the Win CNC file and changed the x axis demention....and it fixed the measurements,