PDA

View Full Version : IH user of Dolphin



sandefuj
04-26-2007, 06:54 AM
Hi All:

Just wanted to let you guys know, about my experiences with Dolphin Cad. I got one of the last mills and CNC kits from Aaron as he was closing. I saw the special that the new owners were having with Dolphin and thought I would give it a go since the price was right. Their support has been great; they have helped me with two problems that required modifying the Mach3 post processor. Rodney has been my point of contact, and he has gotten back to me very fast with the modifications. I’m still learning the software, and experimenting as I go, I hope to figure out the Z axis profiling this weekend.

Keep up all the good post....I'm watching the belt drive conversion, thinking I will convert if others are uccessful.

Jay

TZ250
05-25-2007, 11:47 PM
Jay,
Please keep us updated on the finer points of Dolphin.

I bouht Level III milling software, but haven't had the proper amount of time to devote to it.

I'd be interested to read anything that you think might help.

BTW, I've only called Rodney once, but he was very quick to return my call and was helpful.

sandefuj
05-26-2007, 07:07 AM
I see your username is TZ250. I use to have and race RZ350's. Nothing like a two stroke.

TZ250
05-27-2007, 01:10 AM
Long live two strokes! :)

You might like these.
http://i122.photobucket.com/albums/o267/TZ250_Fanatic/ea2c7998.jpg

http://i122.photobucket.com/albums/o267/TZ250_Fanatic/Dscn0970.jpg

sandefuj
05-28-2007, 08:40 PM
That's so cool. I never could afford a TZ250, and I wasn’t fast enough anyway. But I sure loved racing the 350.