PDA

View Full Version : Problem Alarm no SKT21



Millerdiego
06-17-2018, 11:37 AM
Hello.
I'm with him, the photo alarm. AL-32 center point ng.
the lathe does everything except turn the spindle. does not run in the automatic mode.
Does anyone know how to solve ??
thank you.

OkumaWiz
06-18-2018, 01:55 PM
Does your machine have the tail stock quill confirmation switches? They may be out of position or you may need to bypass them with M-code in order to turn on the spindle with the quill retracted.

mbservice
06-19-2018, 08:36 AM
AL-32 Abnormality in RAM internal to LSI for serial data transfer

Did you try and load a program as I think your memory requires clearing

CNCELOS
04-13-2019, 05:54 AM
Hi
I understand this thread is one year old, but have you solved your problem?
I have a SKT200 2007 Oi with the same alarm.
When i try to MDI ex: M03S1000 it clicks and pops the same Al.
rgds