PDA

View Full Version : Mach3 and Tool Setter



ints99
04-08-2007, 02:55 PM
How to use Tool Setter w/Mach3?

1) What ToolSetter to use? Is TP100 ok? http://www.cadcamcadcam.com/index.asp?PageAction=VIEWPROD&ProdID=10

2) How should I setup Mach3 to take use of it?

3) What modification to G-code is needed?

Big-tex
07-31-2010, 06:29 PM
I have better solution for you that already works fine..
Read it here.
http://www.cnczone.com/forums/showthread.php?t=100594&page=9