PDA

View Full Version : Table display screen reversed?



bcnc
04-03-2007, 09:35 PM
The table layout screen in the upper right corner of mach3 screen, everything is reversed. If my part I want to cut is in the upper left of the table layout,it will actually cut the part in lower right on my table. Don't think this is normal ,is there a way to reverse this? The cursor crosshair is also reversed. I tried to do it with my machine settings but did not work. Thanks Brian

heliboy
06-16-2007, 02:23 PM
I was wondering if you found a solution to the reversed image.

ger21
06-17-2007, 12:48 AM
Sounds like one or more axis are moving in the wrong direction.