View Full Version : Wrong post processor? There is no lead in on my. Parts for plasma.

01-17-2018, 01:10 PM
I have a home built CNC plasma machine running a hypertherm 45 XP I haven't cut in pretty good but I'm having some trouble with my lead Ins And Lead outs delete out cuts no problem but it seems as if I don't have a lead in when I look at the piece after I cut. I'm running Mach 3 and sheetcam it has anybody had this problem before

11-30-2018, 10:15 AM
Old post, but if there isn't room for the lead in or lead out then it won't cut with one... shorten the lead distance or use and arc instead etc.