PDA

View Full Version : opinions and maxnc?



july_favre
03-19-2004, 01:26 AM
Im looking to get a cnc lathe and mill to do smaller stuff, has anyone had any experience with the maxncs? Im looking to spend around 5k on both the mill and lathe and the maxnc machines are some of the ones Im considering. My main concern is power and how rigid they are.
Im also considering the shaptask but Im not a big fan of the 3in1s. If anyone has any alternatives I would like to hear about them.

svenakela
03-19-2004, 04:49 AM
I haven't been using them by myself, but i investigated MaxNC for a project and they are for sure nice machines. Their Closed Loop systems have pretty small motors but for running that size of tables they are enough.

Regards,
Sven

svenakela
03-19-2004, 05:02 AM
I haven't been using them myself, but I investigated MaxNC for a project and they are for sure nice machines. Their Closed Loop systems have pretty small motors but for running that size of tables they are enough.

Regards,
Sven