PDA

View Full Version : Fanuc C (for chamfer) stops ncplot



duenow
03-17-2007, 03:34 AM
I hardly use the C for chamfer, but loaded an old program & Ncplot
stops at that line with an error. This is Fanucs blue print programing
on OTC.

duenow
03-17-2007, 03:36 AM
I hardly use the C for chamfer, but loaded an old program & Ncplot
stops at that line with an error. This is Fanucs blue print programing
on OTC.

Here is the code:


G01Z0.X.45F.010
X0.6150,C.0130F.0050
Z-0.020

lgreeves
03-17-2007, 03:58 PM
It may not like the comma.

tobyaxis
03-17-2007, 04:24 PM
I don't think NC Plot Suports "C" Chamfering and "R" Radius in OTC Programming.

Scott will have more information than I do.

Can you post your whole G-Code file? I will do the angle for you an post back here so you can at least have a working Back Plot for the whole Program.:)

MetLHead
03-17-2007, 08:55 PM
Here is the code:


G01Z0.X.45F.010
X0.6150,C.0130F.0050
Z-0.020

NCPlot doesn't like the comma. If you take it out, it should work.

Scott

duenow
03-18-2007, 02:24 AM
NCPlot doesn't like the comma. If you take it out, it should work.

Scott

The use of C A or R require the comma. Not a big deal.

sakis
03-20-2007, 08:34 PM
can it be added? I use , alot and i am having to find and replace just to run a backplot.

just a suggestion

MetLHead
03-20-2007, 08:46 PM
can it be added? I use , alot and i am having to find and replace just to run a backplot.

just a suggestion

Yes, I've put this on the list for the next update.

Scott

tobyaxis
03-20-2007, 09:05 PM
Yes, I've put this on the list for the next update.

Scott

Scott,

I've shown a few people NC Plot V2 and they were AMAZED. You might hit a huge sales record this year.

Thanks for the great product.:rainfro: