View Full Version : Floating Z axis head with PlanetCNC TNG [3D print files included]

09-04-2017, 07:52 AM
To read blog on this topic, follow this link:

This would be some sort of intro into our upcoming article about using plasma machine with PlanetCNC TNG.

You can make your own floating Z axis unit. 3D and STL files are published here:
https://www.thingiverse.com/thing:2516238 (http://You can make your own floating Z axis unit with 3D and STL files published here: https://www.thingiverse.com/thing:2516238)

09-05-2017, 07:18 AM
You can download PlanetCNC post processor file for SheetCAM here, see attachment.

12-31-2018, 07:07 AM
Hi PlanetCNC,
In this clip ( please see picture below) where is the end of each wire of material probe switch ? If them connect with the controller how can I do it? Could you show me please? Thank you a lot.https://www.cnczone.com/forums/attachment.php?attachmentid=408810&stc=1