PDA

View Full Version : Homing questions about IO and sequence in the CNCUSB software



dakman
08-16-2017, 07:07 PM
I have installed my three axis limit switches and have attached them to limit input lugs on the MK3/4 board.

x on input 1
y on input 2
z on input 3

My sequence is set
z , x, y.

Can anyone tell me exactly what needs to be set in the software, in order for my setup to work properly?

PlanetCNC
08-17-2017, 01:52 AM
This topic is covered here:
https://planet-cnc.com/how-to-setup-cnc-machine-using-planetcnc-software-and-controller/