PDA

View Full Version : Looking for Machinist in Durham



graemeian
04-06-2017, 09:20 PM
I have a small shop here in Durham, NC. Included is a 2 year old 40-20-25 high speed milling center, a Clausing manual lathe and a lot of other things I have accumulated. My shop was born to be a research facility where no outside work was performed.
I am considering becoming a job shop for the Durham area when duty calls. I am looking for a machinist with connections. Both machinists and I would get paid when the services were paid. If you can bring work with you, let me know. If you want to work nights and week-ends, that is fine. Thank you.

Allumiworks
09-10-2018, 12:13 PM
i have 2 vertical mills if you need any work done i would be happy to help