PDA

View Full Version : Need Help! What post processor to choose for Omni cnc using Aspire??



Alvaro_Lebtek
02-07-2017, 09:47 AM
Hi, anyone knows what post processor to choose from Aspire to create .nc files for 1325 Omni CNC Router??

Thank you.

gfacer2
02-07-2017, 10:31 AM
Which controller, that's more important.

Sent from my LG-D852 using Tapatalk

Alvaro_Lebtek
02-07-2017, 11:38 AM
Hi thanks for your reply.
I am very new to cnc so i am not sure how to get the controller specificaction.

Please find attached the description of the machine, maybe it helps:


1 OMNI 1325 Basic CNC Router with 6.0kw HSD spindle
X,Y,Z working area: 1300*2500*200mm
Drive and motor: Yako drive and stepper motor
Table size: 1500*3040mm
Spindle: 6.0kw, Italy HSD aircooling spindle, 0-18000RPM
Inverter: Fuling frequency inverter
Spindle Protection Device: Selfcooling for aircooling spindle
3.0kw Dust collector with 2 cloth bags and Dust hood
Bakelite table combined Aluminum T -slot extrusion,vacuum table
Mist Oil Sprayer for Aluminum
X, Y, Z Travelling Potioning Accuracy: ±0.05mm / 300mm
X, Y, Z Travelling Repositioning Accuracy: ±0.05mm
Frame: Big thickened Steel Square Tubes, thickness up to 8mm
X, Y structure: Helical Rack and pinion drive, Hiwin square rail linear bearing 20mm
Z axis structure: Taiwan TBI ballscrew and Hiwin square linear rail 20mm
Max Rapid Travel Rate: 32,000mm/min
Max working speed: 20,000mm/min
Working voltage: 220V, 50Hz
Command languages: G code
Control system: DSP remote controller
Software: Ucancam V10 English version
Limit stop: Extra-travel limit stop and hard limit stop
Emergency stop and Switch: Japan Omron emergency stop and SCHNEIDER switch
Package: In wooden box : 3200*2100*1900mm(12.77CBM)
Gross weight: 1950KGS

gfacer2
02-07-2017, 01:17 PM
So you have a dsp controller, and you'll need a dsp post. Look for Rusty in the omni sub forum and send him a pm or email me if he doesn't respond. He's got a dsp controller and I have his email if he doesn't respond on cnc zone.

Sent from my LG-D852 using Tapatalk

RUSTY2
02-22-2017, 07:25 PM
Hi, anyone knows what post processor to choose from Aspire to create .nc files for 1325 Omni CNC Router??

Thank you.

I have a Omni Pneumatic Tool Change 1530 with a 4th axes I have a A55 DSP Controller I use MODEL MASTER ATC INDEXTER (mmg) as a post processor . hope this helps