View Full Version : Chevalier 2040 with Dex cans tool change Support

Billet Carb
01-08-2017, 12:23 PM
First, I want to thanks all who have given me help along the way !
My question for today is;
I have a Chevalier 2040 with a Dex cans tool changer and I want to completely tune it up and put in new like control condition.
Each of the actions works, but it is out of phase with the tool release action. I think the little cam that signals to the Funuc OMD controler is slightly off.
I do not know which diagnostic position to look at either.
I am willing to pay for tutoring in this area.
845 473 1136