View Full Version : Q&A on Work of Ring Die Pellet Mill (III)

10-22-2016, 02:46 AM
Q: Last year, i bought a ring die pellet mill from one of your counterparts. But, recently, it is hard to be launched. How to deal it?


A: Thanks for believing us. To solve this problem, you need to do four checks. The first check refers to the electricity, whether it is normal or not. The second object for check is safety bolt, whether it is fractured or not. The third part for check is the travel switch. The last check refers to the inspection door. If you check the four parts but there are nothing wrong, you can tell us and we will arrange specialized technicians to your working site. This is free, be at ease!

Q: Pellets, produced by my ring die pellet mill, are always good and very hot among the market of my country. But, recently, some pellets have coarse surface. How to deal with it? Can you help me?

A: Thanks for your question. It is the question that we often meet. To deal it, you need to notice two aspects. The first one is to properly control the fineness of raw materials. During the modulating process, all materials should be enough softened. The second one is to specially treat the materials rich in fiber. To deal this kind of material, you do not need to add too much steam during the modulating process, since they are easy to have steam bubbles inside. These bubbles may be broken when pressure changes.

Welcome any question on website!

Fote Heavy Machinery: http://www.woodpelletmillsell.com/product/wood-pellet-mill.html (http://www.woodpelletmillsell.com/product/wood-pellet-mill.html)

Email: vip@sinoftm.com (vip@sinoftm.com)