PDA

View Full Version : High amp driver board



jimglass
04-09-2003, 09:17 PM
I'm already using a Xylotex driver board on some 60oz/in stepper motors. They are doing upgrades at work and are changing out some 450 oz/in steppers with servo motors. I already have 3 or 4 of the 450 oz/in motor in my basement. I'm looking to use them on my next project. What driver board would I use on these large stepper motors.

Thank,
Jim Glass

balsaman
04-09-2003, 09:46 PM
Need more info. What current and voltage? What about the driver that was in the equipment being upgraded?

Eric