PDA

View Full Version : Skt300 tapping help



albeens
08-11-2016, 06:16 AM
We purchased a Hyundai kia skt300 lathe but can not get the g84 cycle to work. Can someone with a Hyundai kia machine please post there g code with a g84 cycle so we can see what's been done wrong. Sorry I can't post ours I don't have access to it currently.

khaot83
10-07-2016, 08:37 AM
did you find it out?

you need to command depending on which spindle
M3 Sxxx
M122 (main spindle rigid tap mode (maybe on the SKT300 not needed))
M129 Sxxx (rigid tap mode)
G84xxx
G80
M128 (rigidtap mode cancel)
M123 (cancel main spindle

or

M122 (main spindle rigid tap mode (maybe on the SKT300 not needed))
M3 Sxxx
M129 Sxxx (rigid tap mode)
G84xxx
G80
G128 (rigidtap mode cancel)
M123 (mainspindle rigid tap mode cancel)