PDA

View Full Version : Anyone have experience with Chinese made ATC - GDL80-20?



SamBamboo
06-18-2016, 03:36 PM
Hey guys I am looking into buying an ATC, was wondering if anyone has experience with these
Gdl80-20-24z/2.2 2.2kw Iso20 Automatic Tool Change Spindle Motor For Cnc Machine - Buy Spindle Motor,Automatic Tool Change Spindle Motor,Iso20 Atc Spindle Motor Product on Alibaba.com (http://www.alibaba.com/product-detail/GDL80-20-24Z-2-2-2_60182159503.html)
Model number: GDL80-20-24Z/2.2

http://www.cnczone.com/forums/attachment.php?attachmentid=324058&stc=1

I see different manufacturers building these using the same model number @ Alibaba.
They typically run about $1,800 - $2,200

I hope to hear some responses
Thank you

lael
06-26-2016, 10:21 AM
Unfortunately I don't have any experience - but am also very very interested in this topic. We are investigating the stepmores 6090ATC which looks like it has a spindle similar to this one. Keen to hear anyone's first hand experiences.

?????? (http://www.stepmores.com/product-557073afbd04bf527f8b4567.shtml)

similar spindle changing tools: https://www.youtube.com/watch?v=dHmFvhpBILI



Hey guys I am looking into buying an ATC, was wondering if anyone has experience with these
Gdl80-20-24z/2.2 2.2kw Iso20 Automatic Tool Change Spindle Motor For Cnc Machine - Buy Spindle Motor,Automatic Tool Change Spindle Motor,Iso20 Atc Spindle Motor Product on Alibaba.com (http://www.alibaba.com/product-detail/GDL80-20-24Z-2-2-2_60182159503.html)
Model number: GDL80-20-24Z/2.2

http://www.cnczone.com/forums/attachment.php?attachmentid=324058&stc=1

I see different manufacturers building these using the same model number @ Alibaba.
They typically run about $1,800 - $2,200

I hope to hear some responses
Thank you

SamBamboo
06-27-2016, 11:43 PM
325214

lael
07-05-2016, 03:14 AM
http://www.cnczone.com/forums/attachment.php?attachmentid=325214&stc=1

Got any suggestions Sam?

something2do
12-13-2017, 10:36 AM
I have just bought one to fool around with. My machine will need upgrades to make it more rigid but it will work good enough to learn on before moving to a bigger machine . I think the biggest hurdle with this project will be hooking up the peripherals (air lines , regulators, throttle valves, and water cooling). Some of the instructions don't make sense yet but will be worked out with the help from this forum. I hope someone else has since put one on since this post was first started.

allencncrouter
12-14-2017, 02:25 AM
OMNI 1325 Synetc +China water cooling ATC spindle
https://www.youtube.com/watch?v=mWkkUilyprE&feature=youtu.be