PDA

View Full Version : How to Make Sawdust Pellet Mill Perform Well?



bigbiggirl
05-23-2016, 05:12 AM
Feeding way is often a problem that is easy to be overlooked. For many new users of saw dust pellet machine, they often feed materials in faster or slower speed. As a result, working performance of sawdust pellet mill is easy to be seriously influenced. To prevent fodders from blocking the die holes and alleviate the unnecessary wear, you should clean the sawdust pellet mill after working process.

http://en.kssbchina.com/image/?d=2276170

After working for more than 200 hours, you should clean the bearings. To lubricate the bearings with machine oil, you should make the oil be filled into the one third gap of bearing seat. If bearings are seriously worn out or damaged, you should change them with new ones immediately and lubricate the new ones frequently.

If bearings used to equip for sawdust pellet mill are in cones, you should check the axial distance and keep it at distance between 0.1mm to 0.3mm. If there is something wrong with sawdust pellet mill (http://www.woodpelletmillsell.com/product/sawdust-pellet-mill.html), you should adjust the failure by increasing or decreasing the paper cushion at bearing cap.

If there is something wrong with the formula in raw materials, you will confront the problems like low output and serious wear. If biomass pellets are used for feeding rabbit, content of grass powders in raw materials will be smaller than 50%. If content of grass powders is too high, molding work of sawdust pellet mill will be hard to do. Besides, water content in raw materials should be kept at about 20%.

Fote Heavy Machinery: http://www.woodpelletmillsell.com/solutions/wood-pellet-production-line.html

Fote Official Email: vip@sinoftm.com