View Full Version : Phased Plans for Maintaining Fote Wood Chip Dryer

04-18-2016, 05:22 AM
Maintenance work is necessary for any machines and it is no exception for wood chip dryer. For the daily maintenance, it includes three points. At first, you should use the soft cotton to clean the wood chip dryer every day. Then, you should check the valve, filter and lubricator before running the wood chip dryer. If oil inside is insufficient, you should immediately add and discharge the remained water.


To ensure the ventilating effect and exert the greatest value of wood chip dryer, you should clear the fibers stored in the dust box. As to the monthly maintenance, it includes four points. Firstly, you should open the trunk and clean the exterior part of wood shavings dryer with soft cotton. Secondly, to alleviate the wear, you should lubricate the movable parts like bearings with oil. Thirdly, you should check the tightness of belt and adjust the belt pulley.

At last, you should check and firm those parts that are easy to drop off or loosen after being shocked like electrical circuit, door rocker and pipe joint, etc. For the yearly maintenance, it includes five points. Firstly, you should check and firm the screws for fastening the seat of wood chip dryer. Secondly, you should check the loosening situation of supporting springs and firm them. Thirdly, you should check the landing situation of wood chip dryer (http://www.ft-dryer.com/products/wood-chip-dryer.html) and ensure there is nothing wrong.

Fourthly, you should check the flexibility of parts like computer board, wind wheel and heat exchanger. At last, you should send the instruments like thermometer to the local Technical Supervision Bureau for metering. Enjoy discounts on website of Fote Machinery (http://www.ft-dryer.com/about/contact.html)!

Fote Heavy Machinery: www.ft-dryer.com (http://www.ft-dryer.com/)

Fote Official Website: vip@sinoftm.com