View Full Version : Operational Techniques of Sawdust Dryer Machine

04-11-2016, 04:33 AM
Sawdust drying machine, with another name of sawdust rotary dryer or sawdust dryer machine, is an amazing machine to turn agricultural wastes into things of great value. The following content mainly discusses about some operational techniques for you to take as references. Before the operation of sawdust drying machine (http://www.ft-dryer.com/products/Sawdust-dryer.html), we should firstly check the joints of power supply and the fixed position of rotary drum. Then, turning on the power switches to make the rotary drum run. The running direction should be in accordance with the interior label.


If the heating wire of sawdust rotary dryer (http://www.ft-dryer.com/about/contact.html) has worked for almost 5 minutes but without the discharging of hot air, there must be something wrong with the discharging mouth. What we should do is to firstly turn off the motor and then check the blocking condition of discharging mouth. For drying process, the covers should be lied down. For dismantling process, shut-down should be firstly done. For the rotary drum, it should not be overloaded.

With three state-level machinery research institutions and more than 50 national patents, Fote Heavy Machinery has established favorable relationship with department of science and technology as well as key universities and colleges. All these enables the leading position of Fote in mining machinery manufacturing industry. Therefore, Fote products are worthy of trust. If you need our products, please click the website and leave messages on it: http://www.ft-dryer.com. Professional personnel and engineers in our company will contact with you as soon as possible. If you have any question about our products, leaving your advice on our website is also OK. We will take them sincerely. Thank you! Sincerely welcome you to come for site visit and inspection.


Email: vip@sinoftm.com