PDA

View Full Version : Debugging Work for FTM Straw Pellet Mill



bigbiggirl
04-06-2016, 02:00 AM
With the remarkable ability to turn agricultural and forestry wastes into biomass particles of great value, straw pellet mill is becoming more and more popular in these years. As to the debugging work for straw pellet mill, you should firstly prepare 50kg oil materials and then evenly mix them. After launching the straw pellet mill, you can gradually add the oil materials into the ring die.

http://en.kssbchina.com/image/?d=2276171

Pointer of ammeter should turn up and then down. For the situation that pointer of ammeter only turns up, it represents the discharging failure. If discharging work is normal, you can deliver the extruded materials into ring die for about 30 minutes. When the pointer of ammeter falls down, you should suitably add the feeding amount to make the major motor be normally loaded.

Through the repeated operation, you will be able to process the qualified pellets. Service is the part of product and competitive strength of enterprises. FTM China Machinery (http://www.woodpelletmillsell.com/about/contact.html) always holds the service standard that users’ demand is the orientation to implement the service management, users’ satisfaction is goal to carry out the brand service.

As for the service spirit of “enthusiasm, servant and faithfulness”, it should run through the whole service system. With the effort to make specialty classic, FTM China Machinery will always regard the demands of customers as the persistent pursuit. Interested in the price of straw pellet mill (http://www.woodpelletmillsell.com/product/straw-pellet-mill.html)? To extend the world markets, FTM China Machinery can offer greater discounts for you in the first five months of 2016.

Fote Heavy Machinery: www.woodpelletmillsell.com (http://www.woodpelletmillsell.com/)

Fote Official Email: vip@sinoftm.com