View Full Version : Modulating Work for FTM Straw Pellet Machine

04-05-2016, 03:43 AM
If you want to produce fodders for poultry like chicken, pig and turkey, you should use the straw pellet mill to process materials with high cereal. To make the cereal be pasted and adhered, you should heat the cereal materials to 82? and water them from 17% to 18%. For the protein content in complete materials, it generally varies from 12% to 16%. Besides, a lot of soft and coarse components exist in the complete materials.


Since these components are quite poor in the ability to absorb water, you should control the steam addition, control the temperature less than 60? and water content from 12% to 13%. If temperature and humidity of complete materials are too high, biomass pellets produced by the straw pellet mill will be easy to swell after being discharged out from the ring die. Known as the NO.1 brand of straw pellet machine (http://www.woodpelletmillsell.com/product/pellet-machine.html), FTM China Machinery looks forward to working with you in the near future.

The important part of modulating work is to add the steam at proper content. Steam quality can influence the quality of modulating work. If steam addition is too much, raw materials will become softened and is easy to block the die holes. If steam addition is sufficient, pasting degree of raw materials will be very poor. What’s worse, raw materials will be difficult to be pelletized. For processing different materials with different formula, you should add the steam in different amount during the modulating process.

Interested in the price of straw pellet mill (http://www.woodpelletmillsell.com/product/straw-pellet-mill.html)? Leave messages on website of FTM China Machinery to get the discounts!

Fote Heavy Machinery: www.woodpelletmillsell.com (http://www.woodpelletmillsell.com/)

Fote Official Email: vip@sinoftm.com