PDA

View Full Version : Ways to Avoid Failures of Sawdust Pellet Mill



fotemachinery
03-22-2016, 03:47 AM
With the amazing ability to turn agricultural and forestry wastes into biomass pellets of great value, sawdust pellet mill is regarded as the top choice to make the biomass pellets. Featured in the high thermal efficiency, easy storage and convenient transportation, biomass pellets can serve as the excellent fuels or fodders. For grass powders in raw materials, their content should be no more than 50%.


313357

Normally, you should clean the bearings with gasoline or diesel for every five days. After the cleaning work, you should fill them with high velocity oil. For every half year, you should make the maintenance for gear box. For every seven days, you should clean the vertical bearings. Then, for every eight hours, you should lubricate the principal axis with butter. When it refers to the change of molding plate, you should firstly dismantle the retaining nut.

Screw holes with 8mm, located at the both sides around the center hole of molding plate, can be gradually pushed out with screws. If you feel tired, you should use the hammer to strike the molding plate for the fear of screw breakage. If failures occur during the working process of sawdust pellet machine, you should immediately shut down the machine and solve failures with instructional books. If you feel helpless, you can ask help from us.

Known as the NO.1 brand of sawdust pellet mill, FTM China Machinery dedicates to offering the best products and services for you. Greater discounts for you on website!

Fote Heavy Machinery: www.woodpelletmillsell.com (http://www.chinawoodpelletmill.com/products/5-sawdust-pellet-mill.html)

Fote Official Email: vip@sinoftm.com