PDA

View Full Version : PLC's on Mattison grinder



wireguy
02-11-2004, 12:30 PM
Question on GE series 1 plc's
we just bought a used Mattison grinder (87) and the guy who set it up was going to copy the program down from the plc with a "reader" and put it on a cassette tape so we would have it incases of power spikes or surges and we lose our program. The plc has a jack for a tape player in it and switch for run and program. Was his reader just a tape player can I down load this myself.
Does any one know about these plcs.

kwcurtin
02-16-2004, 01:16 PM
You can use most cassette recorders for this, although you may have to tweak the tone control.

Another option would be to get a copy of LogicMaster1. This would allow you to load/store the program via a PC. Also, you would be able to view and edit the ladder logic.

GE Fanuc has a user forum you might take a look at...
http://www.geindustrial.com/cwc/gefanuc/index.jsp

Industrial
02-06-2015, 04:23 PM
REPAIR-PROGRAM GE SERIES ONE bes1 (http://www.blanchardengineeringservices.com)