PDA

View Full Version : 1/8" Hardboarrd (HDF)



gator9266
12-10-2015, 05:07 PM
Hi
Experimenting with 1/8" HDF. Onsrud gave some help with bit selection but I am still trying to dial in my feeds and speeds to get a clean edge with no "fuzz". Any ideas are appreciated. Thank you.

Greg

ger21
12-10-2015, 06:03 PM
What bits are you using?

gator9266
12-11-2015, 09:34 AM
Hi
Onsrud 66-092 on 1/8" thick HDF

Thanks
Greg