View Full Version : New Omni 1530 just about ready

10-29-2015, 10:27 PM
Ordered 1530 pneumatic tool change from Jack at Omni, so far so good very good to work with and has been very helpful being I am new to routers. He sent me my Artcam Express 2015 early that was great so I can start playing with the software and was able to upgrade for free to 2015 R2 , guys on the Artcam forum are good to deal with as well. Decided to go with a The DSP control A57 that will allow you to follow the tool path on screen when cutting anyway here are a few pics

10-29-2015, 10:49 PM
So you bought a bundle artcam and cncrouter. How much total you pay for them?

10-30-2015, 12:44 PM
Rusty2 - what is your Z height? Looks really big. - otherwise looks nice. That DSP controller sounds a bit nicer too with the display. Maybe mine is one of the ones in the background! G

10-31-2015, 11:02 AM
Went from standard 300 mm to 500mm to clear the 300mm rotary . The Z axis ballscrew are larger to confirm stability. Yes the newer DSP will show tool paths plus is has more controls for rotary

01-04-2016, 06:28 PM

Machine came in so far looks good. I have spent the last few weeks getting it set up have everything up and running except the Vac. table Omni gave about 1 1/2 hrs on online training to sort out a few problems and I paid them $200.00 more for some detailed training on using the pneumatic tool change will see how it goes from there.

10-28-2016, 03:16 AM

11-08-2016, 02:16 AM