View Full Version : how to rotate solid model on XZ or YZ plane

12-03-2006, 12:07 PM
Hi all,
is there any way to rotate the solid model on XZ ro YZ plane?
Thank you

12-03-2006, 12:57 PM
Change your c-view before rotating. make your actual view the same as your c-view the first few times until you understand how it works. the direction you choose to rotate the part will be counterclockwise for a positive angle, clockwise for a negative number based on your c view. You will also have to choose the point of rotation, be it a corner of the part, coordinates or a center of a line or arc, etc...


12-07-2006, 06:16 PM
looking at top. and you want it upside down, view front-transform-move-rotate visable-180 deg, now return to top view, (cview set at 0-same as current view)

12-08-2006, 10:35 AM
got it
Thank you