PDA

View Full Version : drag knife tool disappeared in sheetcam



Lama2
09-21-2015, 04:14 PM
Hello,
I purchased a Sheetcam license with a dragknife option and was able to use it for some hours. Then after importing a new file (that was probably scaled too small) I tried to create the dragknife path and the program reported several errors and kind of crashed.


After restarting sheetcam the icon for the dragknife tool was disappeared! I can only see and use the standard tools. No more drag knife tool
Yet the license is installed.

Any suggestions?
Tx

Lama2
09-22-2015, 10:11 AM
Problem solved in the meantime thanx to a Les from Sheetcam:
Check under Options->machine->machine type , check if the 'drag knife' option is selected.
it wasn't ..
Thanx Les