PDA

View Full Version : Need circuit board - Shop Sabre 7214



futureform
09-15-2015, 02:45 PM
Shop Sabre 7214. Z Axis stopped working. Fuse blows when power turned on. Tested across power in pin to ground pin, dead short. I need to replace this board asap, anyone know where I can buy a replacement or a quick repair?

Thanks

john-100
09-15-2015, 05:18 PM
going by the photo ,
it could be an old stepper driver from Gecko Drive , some thing like the G201 ?

do you have the schematic and any other documents for the Shop Sabre 7214 ?

John

futureform
09-15-2015, 09:36 PM
Thanks for the reply. I'm not very tech savvy. I do not have any documentation on the machine, wish it did. I might see if I can find one on E bay. I will try searching for the Gecko boards and see if one will work . Thanks.

CNCUSER51
09-16-2015, 09:31 AM
Shop Sabre 7214. Z Axis stopped working. Fuse blows when power turned on. Tested across power in pin to ground pin, dead short. I need to replace this board asap, anyone know where I can buy a replacement or a quick repair?

Thanks

ShopSabre has a parts department - www.Shopsabre.com
Give them a call and they can help.

futureform
09-16-2015, 06:21 PM
ShopSabre has a parts department - www.Shopsabre.com
Give them a call and they can help.

Thanks, I couldn't find anything on the website. I'll try again.