PDA

View Full Version : drilling holes



WOODKNACK
11-30-2006, 07:04 PM
for some strange reason i cant get sheetcam to drill 2 seperate holes. It see the first one and shows the tool path but the second one (which is a different layer) it doesnt show a tool path to it. these holes are about an inch apart. Is that a bug in the new sheetcam. Not showing the tool path for more then one hole. or is it something im doing?

Bubba
11-30-2006, 09:10 PM
AHA, A new piece of information, you said two layers, that means two processes! Either put both holes on the same layer or do two processes.

Bubba