PDA

View Full Version : Need stepper motor replacement help



ProjectCNC
01-29-2004, 03:45 PM
I recently purchased a used Gerber D200 router.
One of the stepper motors is bad. I cant find the exact model # for replacement. Any suggestions on what I could use without having to make any adjustments. I want to bolt on and go. Following are specs on bad motor:
Superior Electric SLO-SYN
Type M063-LS-514
Hold 150 oz.
Spec. BM101025
200 steps
2.25v
4.6 amp
dc hz
Thanks in advance,
Darrell

Hobbiest
01-29-2004, 03:47 PM
what frame is it? NEMA 23, 34, etc

ProjectCNC
01-29-2004, 04:14 PM
Nema 23