PDA

View Full Version : Good Design Performance of Wood Pellet Making Machine



AdminCrew
07-28-2015, 10:22 PM
Wood pellet making machine contains hydraulic pressure pump, which can adjust pressure automatically to fit for different materials pressure ratio. When adjusted to the fit pressure, pressure will keep stable automatically, but other supplier pellet machine need to adjust pressure manually each time use, very trouble to operate.
Wood pellet making machine (http://www.woodpelletmillchina.com/news/n5.html) also contains full automatical lubricate spare parts oil systems, which can lubricate spare parts oil automatically---- spare parts such as rollers, vertical shaft, gears, bearings, but other common supplier pellet machine needs to add oil each four working hours, very trouble to operate. Wood pellet making machine works with air fan and bags dust filter, on one hand, it will clean dust, protect the environment effectively. On the other hand, it can cool pellet machine inner spare parts heat temperature, making sure long continuous working time.
Wood pellet making machine adopts ring die pellet machine vertical feeding materials advantages, feed materials vertically and directly to pelletizing room, ring die and roller assemble works in a horizontal way, but other supplier common ring die pellet machine only can feed materials from gear box side and its ring ide work in a vertical level, their feeding speed and working efficiency are both very low. Its spare parts can not produce large pressure, especially inner big shaft and bearings, if can not produce large pressure, after long continuous hours, will be easily broken.
When wood pellet making machine (http://www.paradisedivingasia.com/equipment/wood-pellet-mill.html) works, its ring die only bottom layer make function(only bottom layer tough with roller assemble), once ring die bottom layer broken, turn over it and make the top layer to bottom, then it will work secondly time. So one ring die can use two times. Also the top and bottom layer hole dimension can be different, so one ring die can press into two different diameter pellets . but other supplier pellet machine just have one layer and only can use one time.
Wood pellet making machine has one ring die with two--layers: the top layer and bottom layer .when pellet machine works, rollers will move, toughing with ring die bottom layer, the ring die keeps stable, in this way, ring die top layer will rebound the splashed materials into bottom pressing room, increase its capacity and working efficiency, common ring die pellet machine will splash a lot materials outside when working. Welcome to contact or visit Fote Machinery: info@sinoftm.com.