PDA

View Full Version : servos (encoders, drives)



gv71
01-26-2004, 05:56 PM
I would like to know all the technical stuff about these. There is alot of jargon I don't know what it means or does. If someone could point me to a website that would be great. Thanks!!!



Greg

Al_The_Man
01-26-2004, 06:20 PM
If you do a search for all that hardware you want information on, go to as many of the manufacturers web site's as you can, as a lot have not only have theoretical information, a few have free software for designing your system, amplifiers & motor sizes etc.
a place to start would be www.electromate.com www.motionvillage.com www.motiononline.com, Do a search for incremental encoders and you should get a lot of encoder manuf. For specific questions, you can always ask here.
Also try and get manufacturers free catalogue's, many have a wealth of technical data.
Hope this helps.
Al

gv71
01-29-2004, 07:53 PM
Thanks for the help Al!!!



Greg

Kookaburra
03-31-2004, 01:43 AM
GV71,

That is my businness, if you ever need questions asked I will be happy to help you any way I can, feel free to PM me with questions.