PDA

View Full Version : Need Help! Rhinocam and Ruijie router



lancon
06-22-2015, 08:59 AM
Hi All..

Can anybody tell me where I can find the post processor settings for Rhinocam and a Ruijie router.
Need to cut a 3D mould.

Kind Regards

Lancon

awerby
06-22-2015, 04:10 PM
If there isn't any post-processor for your machine pre-configured in their list, Mecsoft will write one for free. It would help if you could provide a sample of the code your Ruije accepts.