PDA

View Full Version : Final cut in oposite direction



yham
06-03-2015, 12:47 PM
I am looking for a solution of profile cutting where rough cutting and final cutting will be performed in oposite direction - one in climb, other in conventional. Haven't noticed an option for that. Is there any work around?

Thanks
Yham

Zorbit
06-04-2015, 04:27 PM
Two operations. First operation 'mixed' or 'conventional', with some stock left, second operation 'climb' with stock set to zero. Or the other way around depending on your needs.

yham
06-04-2015, 04:39 PM
Two operations. First operation 'mixed' or 'conventional', with some stock left, second operation 'climb' with stock set to zero. Or the other way around depending on your needs.

Hi Zorbit,

It looks like there is no single operation. Thanks for idea.
Yham