PDA

View Full Version : New Here Chinese Machines



Epp
05-20-2015, 11:16 AM
Hi, I`m new to the forum and to cnc router machines.
I`m considering buying my first cnc router.
Looking at Omni or XYZ tech from China as their prices are reasonable.
2000*3000
9kw HSD Linear atc

Any advise on what I should look out for?
Is there somebody using either one of these machines in SA?

Thanks in advance for advice and for a great forum.

shearder
07-20-2015, 02:56 AM
I bought a 1212 from China from SaleCNC. no issues. Watch out for shipping. I would suggest getting a shipping agent that can do the slog for you and have it delivered to your door. It cost a bit more but I got it!

ogive
07-20-2015, 09:26 AM
I would ask for a Mach3 controller and Software instead of the NC Studio the Chinese machines usually come with...and ball screws on all axis.

shearder
07-20-2015, 01:09 PM
I am converting to mach3 because my pc with the ncstudio controller card was stolen so I want to switch to a laptop so I need usb hence mach3. However ncstudio was rock solid for 3 years

Sent from my GT-N7100 using Tapatalk

aarggh
07-20-2015, 06:47 PM
Surprisingly I also have found NCStudio to be absolutely rock solid over the years, never once a hint of a glitch.

cheers, Ian

dmannock
07-21-2015, 03:53 AM
Check my most recent posts. They will give you some idea of what you are about to discover.

ogive
07-21-2015, 04:26 AM
I bought my machine from Jinang Glatt and I am very happy with it. Shout if you would like the contact details. I also used a local shipping agent to sort out the entire transaction. I paid them for the machine, shipping and transport to my house. They handled everything.