PDA

View Full Version : Achieve Production Performance of Briquette Machine



AdminCrew
05-20-2015, 05:11 AM
Briquetting machine, also called briquette press machine, briquette making machine or briquette maker, is mainly applied to press all kinds of powdery and granular materials into ball shape or other shapes by means of extrusion. Briquette machine can press coal, carbon powder, lime, gypsum, coal slime, metal powder, etc. (http://www.ballpress-machine.com/briquetting_machine.html)
Briquette machine can handle raw material with water content of less than 15% even 12% and without any use of adding binding agent into material during the process of briquetting. High temperature and high pressure remains the main factors in producing briquettes and they can definitely not neglected. Either of them is less sufficient likely resulting in disqualified briquettes. In particular, we can apparently see a heating coil mounted outside of forming sleeve in this regard. Central hollow of briquettes by screw typebriquette machine is the unique character of briquettes which are different from those produced by mechanical stamping briquette machine or hydraulic briquette press. However, all the agricutural waste and wood waste can be put into use yet with different compression ratio within briquette machine.


Briquetting machine according to distinguished application of feedstock can be split into various types such as sawdust briquette machine, rice husk briquetting machine, saw shavings briquette press. Biomass briquettes from briquette machine can be combusted straightforward but under most circumstances, briquette machine (http://www.ballpress-machine.com/pro1.html) is mainly used to offer briquettes to briquettes carbonization, namely to obtain machine-made charcoal due to extended market of charcoal demands but decreasing supply.
If material after being crushed and dried has been suitable for the next step briquetting, there is still certain importance which shall be attached to.
1.The Briquette Presses shall be fixed on a flat foundation.
2.During the process of briquetting, temperature should be adjusted according to extruding situation. The electrical heater covers a wide scope of temperature for your reference. Different raw materials demand distinguished temperatures.
Welcome to contact or visit Fote Machinery: info@sinoftm.com.