View Full Version : Cut2D Drawing Slots Inside a Circle

03-13-2015, 02:14 AM
Hey guys, need your help.I am using Cut2D and I can't figure out how to insert three oval shapes inside of a five inch circle at 0, 120, and 240 degrees. I was able to insert three ovals (oval slot size is .25 x .75 with a .125 corner radius) inside of the circle, but not as those coordinates. I need the oval slots to face the center of the circle too.Does anyone know how to do that in Cut2D?Thanks for the help,Mike

02-28-2018, 12:46 PM
In my opinion, Cut2D is ok for generating your gcode, but it comes up short as a drawing program.
I would recommend using a free CAD program for drawing and import your CAD file into Cut2D.

Try Draftsight (Free) your life will be sooooooo much easier.