PDA

View Full Version : Help Need Manual For Richmill Cnc Indexer



bigmark1972
10-12-2006, 02:58 PM
I have looked absolutely everywhere and cant find a manual for my Richmill c5c indexer the control is a Richmill cnc 300


http://markleenheer.com/Controller.JPG

If anyone can help I will be happy to pay for a copy, etc....

BMackinnon
10-13-2006, 06:24 PM
The last shop I was at had that same model and manual, I rememeber looking thru it. I contacted them but they sold it to a CO. in Maine.

I looked around on the net too .. couldnt find a thing.
Hope ya get your hands on one.

GeorgeR
03-31-2007, 12:46 AM
Are you still looking for a manual - I just picked one up myself and have a manual for mine. I don't have a scanner, but I could probably take a photo of each page if you like (I've got a decent digital SLR).

Bullet605
04-11-2007, 10:28 AM
I am also looking for a manual for Richmill Cnc 30 indexer if anyone could come up with an extra copy

I would also be willing to pay for a copy

GeorgeR
04-11-2007, 07:35 PM
I've put a pdf of my manual on our website - you can get it at:
http://www.farmmap.co.nz/software/richmill.pdf

Dave1
05-08-2008, 01:05 PM
Do you people still need a manual for a Richmill CNC 30?? I finally got my hands on one in PDF format.
PM me with your email if you'd like it.
Dave

Niezingerley
12-16-2008, 08:03 PM
Hello. I ahve a Richmill CNC 30 4th axis indexer, and saw that you have a pdf of a manual for a Richmill controller. Is it possible that I could get a copy of that, please?

Thanks for your time.

Dave1
12-17-2008, 10:14 AM
Hello. I ahve a Richmill CNC 30 4th axis indexer, and saw that you have a pdf of a manual for a Richmill controller. Is it possible that I could get a copy of that, please?

Thanks for your time.

Can't send it if I don't have an email addy:confused:
Will get it out pronto when I have the address.
Dave

Niezingerley
12-17-2008, 11:15 AM
Thanks for the response. Here is the e-mail....

mmetzinger@fairwaymolds.com

Let me know what you would like for the copy of this pdf file...

Thanks again...

Dave1
12-17-2008, 01:15 PM
Hehe, well, a million dollars would be nice:stickpoke
Hope it works for ya:cheers:
Dave

JackP42
01-06-2009, 04:20 PM
Hi Dave,

If you still have it the pdf Richmill CNC 30 manual available, I would greatly appriciate a copy. I have sent you a personal message with my email address.
Thanks in advance.

Jack

erniel
07-07-2009, 08:24 PM
Do you have a pdf file for a Richmill CNC 30 I could get a copy of? I mostly need it for the wire diagram. The whole thing be a blessing.
Thanks,
E

Dave1
07-07-2009, 09:58 PM
Do you have a pdf file for a Richmill CNC 30 I could get a copy of? I mostly need it for the wire diagram. The whole thing be a blessing.
Thanks,
E

Yes I do, need email addy and I can send it.
Dave

erniel
07-07-2009, 10:24 PM
Thank you in advance.
Ernie Lussi
elussi@american-mico.com

Dave1
07-07-2009, 10:57 PM
Email sent.

Dave

erniel
07-07-2009, 11:00 PM
Sorry, I just noticed that my email was wrong.
it is elussi@american-micro.com. I forgot the r.
Ernie

Dave1
07-07-2009, 11:17 PM
Resent

Dave

henriusa
02-24-2010, 01:04 PM
Hello Dave.
I have a Richmill CNC 30 -5c indexer without manual nor wiring diagram.
Is it possible that I could get a copy of pdf manual, please?
Best regards,
Henri
henriusa@gmail.com

misterjoe50
04-30-2010, 01:48 PM
Hello
I have a problem a CNC Richmill 300.
I would need an electric plan.
Misterjoe1@a1.net mail add
Thanks for hers strive.
Greeting of Austria

Theldios
06-04-2010, 04:41 PM
I can use the manuel for Richmill CNC-30 indexer if anyone still has it

mikes@ddtool.com

thank you very much

Theldios
06-09-2010, 03:32 PM
anyone have this in pdf still? please send
thank you very much in advance



I can use the manuel for Richmill CNC-30 indexer if anyone still has it

mikes@ddtool.com

thank you very much

Rob'Z
11-09-2010, 01:50 PM
Please send copy of manual to azride@gmail.com.


Thank you

erniel
11-09-2010, 06:22 PM
Sent the PDF files to RobZ, Theldios, MR Joe, and Henri
Good Luck,
erniel

doowopdave
12-23-2010, 06:01 PM
If anyone has a copy of the manual for the Richmill CNC 30 Indexer, could you please email me a copy of the pdf files. My email is doowopdave@aol.com. Thanks in advance and Merry Christmas to all.

Regards,
Dave

erniel
12-28-2010, 12:31 PM
Dave,
PDF file sent to your e mail
Good Luck,
Ernie

doowopdave
12-28-2010, 01:22 PM
Thanks Ernie & Dave for sending the manuals. It's greatly appreciated.

Regards,
Dave

doowopdave
01-01-2011, 02:45 PM
Does anyone have a manual for a Miyano TSV-25 with Fanuc OM control? We are trying to use our Richmill Indexer with the Miyano but we don't have a Manual for the Miyano to get parameters or M code. Any help would be appreciated.

Happy New Year!

Regards,
Dave
PSI

smm
09-13-2011, 09:16 PM
does anyone have a manual for a cnc 30 control box and richmill 5c indexer

thanks in advance

mspencer@spencomachine.com

zarg
10-24-2012, 10:13 PM
I would appreciate a PDF copy of this manual (Richmill CNC 30) as well. I have the thing and can't figure out how it works...

Thanks in advance...:banana:
Zarg

email to:
zarg_of_utopia@myway.com

germanautoparts
07-13-2013, 06:36 PM
hi im new and would also like you to send me a pdf file please thanks ed

zarg
07-13-2013, 11:20 PM
hi im new and would also like you to send me a pdf file please thanks ed
Leave an email address and I will send you a copy in PDF format..

germanautoparts
07-15-2013, 01:21 PM
my email address is germanautoparts@aol.com

thank you very much!

rickmathews
12-13-2013, 11:05 AM
I too badly need a copy of the manual for the Richmill CNC 30 Indexer, could you please email me a copy of the pdf files. My email is rmathews@epbfi.com. Thanks in advance and Merry Christmas to all.

BICO
05-02-2014, 10:26 AM
Hello all. I just acquired a Richmill CNC 30 indexer and, like everyone here, I don't have a manual. I would be very appreciative if I could get a PDF copy via email at info@bicomachine.com. Thank you.

RockyH
12-20-2014, 10:57 PM
Just like the others, I need a manual for a Richmill CNC 30 indexer controller. If anyone could help me my email address is rocky@westek.biz Thank you.

sethcnc
08-26-2015, 03:54 PM
hi. i would love a pdf of rich mill cnc 30 manual
chocolatesloth@yahoo.com
seth

GeorgeR
11-16-2016, 09:26 PM
Here is a copy of the manual if anyone needs it.

Thanks,
George

69gaugeman
05-23-2017, 03:36 PM
Also looking for a manual for the NC30 control. If anyone is still emailing it please send it to:

rod.kubis@rogers.com

Thanks in Advance

dynamitharry
06-19-2017, 07:32 AM
Hi
Need help! I am also looking for a manual.
Thanks in advance!

dynamitharry
06-19-2017, 07:34 AM
Hi
Need help! I am also looking for a manual.
Thanks in advance

dynamitharry
06-19-2017, 10:14 AM
Hi
Need help! I also need a manual.
Thanks in advance!