PDA

View Full Version : anyone know where i can find information on an allen bradley vfd!



CATCH22
10-10-2006, 11:01 PM
ALLEN-BRADLEY M/N: 160-AA18NP03

BUL.: 160

S/N: 4TAB3TC1 05143

FRN: 7.06 A5EE

HP: 7.5 DP 5.5KW

INPUT: V200-240 30 AMP: 21.1 HZ: 50/60 VA: 8400

OUTPUT:200-230 30 AMP: 18.0 HZ: 0-240

SHORT CIRCUIT CURRENT: 100 KA

This is the information on the back of the vfd,im looking to see if i can run single phase in. but i cant find a manual on this model anywhere.hopefully someone knows where ican find it. thanks mike

Al_The_Man
10-10-2006, 11:02 PM
Did you try the Rockwell site?
Al.

CATCH22
10-10-2006, 11:39 PM
yes i tried the rockwell site but couldnt find it.maybe im just looking in the wrong spot,i dont know.i was on there looking forever and couldnt come up with anything.

unterhaus
10-11-2006, 10:05 PM
I think you're pushing it, but it might work anyway. You probably want to have a line reactor. Are you using a smaller motor, or trying to get close to 7.5 horse?

Al_The_Man
10-11-2006, 10:17 PM
There is a limited amount of information here http://www.ab.com/catalogs/e114/160_30.pdf
And here http://www.ab.com/drives/160c/
Al.

CATCH22
10-11-2006, 10:28 PM
i will be running a 3hp motor with the drive. and it looks like from the information i have found that this drive will work for me. thanks for your help guys.