PDA

View Full Version : Toolchanger SAUTER and CS Lab - MACH3



mazakfred
12-19-2014, 10:08 AM
Does anyone know how my SAUTER tool changer must connect to my MACH3 / CS Lab board + the necessary VB script (do not know if the CS Lab VB script is ok for this turret or adjustments are needed)


The schedule of the sauté turret can be found in the link.




Sauter Toolchanger


https://plus.google.com/u/0/103460406696862436749/posts/XVKdey1tXCr?pid=6094539910468610754&oid=103460406696862436749




CS Lab board
CSMIO/IP-S - 6 axis Ethernet Motion Controller (STEP/DIR) with connectors - CS-Lab CNC controllers CNC Machining CNC software (http://www.cs-lab.eu/en/produkt-2,2-CSMIOIPS___6_axis_Ethernet_Motion_Controller_STEPDIR_with_connectors.html)


VB script


Toolchange MACROS samples - CS-Lab CNC controllers CNC Machining CNC software (http://www.cs-lab.eu/en/artykul-42-CSMIO_Samples.html)




Thanks in advance,

kayaba
02-17-2015, 10:21 AM
i ll check it