PDA

View Full Version : Need Help! RF45 Handwheels?



kevrongfu
10-30-2014, 03:41 PM
Hi,

since this is the CNC conversion page, maybe someone can help me out! i'm looking for 2 handwheels for an older RF45 with 3/4" shaft and the typical RF 3 tooth coupling on the back. Enco can't get them and RF won't supply them. The newer ones have a smaller diameter shaft.

If anyone out there who's done a CNC conversion has 1 or 2 that they'd part with, let me know.

thanks!!

Kevin