PDA

View Full Version : Esprit Training Videos!!



lenny09
10-09-2014, 01:18 AM
Does anyone on here have any Esprit Training Videos?

Arjand
10-09-2014, 02:21 AM
Take a look at theCAMWizard: The Home for ESPRIT Training Tutorials (http://thecamwizard.com/)

Really complete video's with a good instructor that will learn to use ESPRIT very well. I worked at an ESPRIT reseller and we used them muchof the time preparing for a training that we had to give.

sybilsurf
10-09-2014, 11:30 AM
I second that...CAMWizard is well worth it.

lenny09
10-14-2014, 07:25 PM
Cool Thanks! Do any of you own any of these DVD's mention?

Will buy them at half off. I'm sure ya'll have made copies right?


Let me know will trade as well.

Arjand
10-20-2014, 06:06 PM
I have the dvds, but while watching I'm convinced that the effort the maker put in is worth the money. Asking for a copy makes sure that you reduce the chance he will make a new series of video's. They are not that expensive compared to Esprit and the machine tool most of us work with, and its definately cheaper than een few days training

goooose
02-19-2015, 11:06 PM
I curious if there is much demand for Esprit training. I know the above mentioned source is an option but would anyone be interested in another source? I might look into creating some training content, it would be different than what camwizard does. If you are interested or have something you would like to see send me a pm or leave a message here.

sybilsurf
02-22-2015, 03:58 PM
I curious if there is much demand for Esprit training. I know the above mentioned source is an option but would anyone be interested in another source? I might look into creating some training content, it would be different than what camwizard does. If you are interested or have something you would like to see send me a pm or leave a message here.

I would definitely be interested, As long as the training is Wire-centric...seems like even Esprit's help files try to be both for mills and wire, which I think confuses the issue.

goooose
02-23-2015, 09:38 PM
I would definitely be interested, As long as the training is Wire-centric...seems like even Esprit's help files try to be both for mills and wire, which I think confuses the issue.

What about wires are you most interested in. Geometry creation, feature creation, toolpath creation, database settings, automation ... or something else?

devrim
10-28-2018, 07:09 AM
merhaba arkadaslaer bende eg?t?m videolar ve ornek ├žal??ma var sizlere verebilirim