PDA

View Full Version : Tool change after CTS operation



Zeke13
09-29-2014, 01:58 PM
I am having an issue with tool changes after a CTS operation. After completing a coolant thru the spindle operation, the CTS tool comes out of the spindle with a bang, then when the next tool starts (non CTS), the coolant spays under pressure thru the collet slots before starting the flood coolant. It seems as thiugh the CTS pressure is not being completely vented before the next tool is changed.
The machine is a Leadwell V-60iT, with a Fanuc 0i MD.
Can anyone point me in the right direction to fix this?

Zeke