View Full Version : Newbie new Viper XZ

08-01-2014, 09:39 AM
Well, after my first experience with a CNC router (CNC Mogul machine) turned out terrible. I tried a second time and ordered a Viper XZ. What a machine! Very very stable and extremely well built. I am using my own Gecko 540 controller and am fine tuning the motors at this point. As someone who is brand new to this hobby, I am moving slow. My 2.5 hp router fits tight and shows no flex in my testing. I have a long way to go learning to use the software; but the hardware is extremely good! Thanks George!

My next purchase will be a mini metal turning lathe that I can convert to CNC use. It is nice to be retired LOL