PDA

View Full Version : 1.4571



APX
05-24-2009, 10:47 PM
Hello!

Who’s got experience with machining of 1.4571? What WP and WP-cutters do you use? Your cutting values for roughing and smoothing? Up to 20 mm for Ae!

Greetings APX

RichardN
05-25-2009, 04:59 AM
Hello!

Me mill everything with Seco’s turbo cutters. Feeding and speed depends on turnover boards. With F40m it’s VC160 and F0.08 with micro turbo and cooling.
I usually make a bit deeper with the speed to be sure that I’m on the safe side.

Greetings Richard