PDA

View Full Version : Enshu E130 Op. Manual



coalstove
08-08-2006, 10:20 AM
I know "God Bless You". Does anybody know were I can get one?

Thanks
Chip

desw
08-25-2006, 03:25 PM
Hi Chip
I have just imported three used (1996) E130 machines and I have some info including operatiing manual.
do you have other info ie. full parameter list / explanation?

Des

coalstove
08-29-2006, 09:00 AM
Hey Des
Thanks for your reply, I have a controller manual, I would be grateful for any info you have.

Thanks
Chip

desw
09-01-2006, 09:36 AM
I bought three E130 machines (as is). The lcd screens are almost illegible and not every part is there but out of three I should be able to make 2 machines work with heaps of spares left. I have a few Fanuc machines and the code is identical (minor exceptions). If you need some help or to swap notes. eml:
cncmachining@aapt.net.au

coalstove
09-05-2006, 10:36 AM
What I could use is a copy of the operator manual, will pay shipping or would take it as a PDF

Thanks

dand0321
02-23-2011, 10:03 AM
does anyone have the parameters including option parameters for this machine? fanuc 21i-m. lost everything!! any help would be awesome.

-Thanks

Antoniocacing
10-29-2018, 02:11 PM
Hai des

I need some info including operating and manual full parameter list / explanation?

Cacing