PDA

View Full Version : Siemens 840C



JZMIG
04-05-2008, 11:17 AM
Hello everybody!

I’m searching for a training supervisor for 840C controller.
I have a turning machine with this controller and I don’t understand how to work with it.
The machine has opposed spindle, tools and Y-axis.
I have programmed only with Fanuc machines.

Thanks in advance
Adam

winnipyton
06-24-2008, 02:18 AM
Hello Adam!

Is it a G-machine?

Maybe I could help.

Regards

Winfried

wimu
06-24-2008, 02:57 AM
Hello Adam!
What machine is it?
I can probably help.

I program with Y/B and opposed spindle.

wimu